TNC-G00 Programmable Stepper Controller
SKU : TNC-G00
Specifications:
- Supply Voltage: 90V to 250V AC 50Hz/60Hz
- Pulse Rate: 100 KHz
- Overall Size: 165mm x 102mm x 76 mm
- Mounting: Panel Cutout 155mmx92mm
- Inputs: 6 NPN NO Inputs, 1 Analog Potetiometer Input
- Outputs: 3 Outputs for Motors Step, Direction and Reserved
- Outputs : 6 Open collector 24V relay driver
- Display: 20x4 Line alphanumeric
- Temperature: 55 Degree C Max operation temperature
- Proudly Made in India
SKU : TNC-G00
TNC-G00 is programmable motion controller intended to replace PLC and HMI
in many
applications at lower cost. Controller supports linear as well as rotary
mode. Rotary or
Division command is intended to control rotary tables but can also be used
to perform
many custom operations. In circular motion (i.e. division mode), there is
no
accumulation of error (i.e. the error is distributed along whole circle
motion if the
programmed motion cannot be achieved exactly due step angle not exactly
divisible).
As NESTED LOOPS are also supported, the programs can do a lot of complex
operations.
Specifications:
- Supply Voltage: 90V to 250V AC 50Hz/60Hz
- Pulse Rate: 100 KHz
- Supports 6 programs
- Overall Size: 165mm x 102mm x 76 mm
- Mounting: Panel Cutout 155mmx92mm
- Inputs: 6 NPN NO Inputs, 1 Analog Potetiometer Input
- Outputs: 3 Outputs for Motors Step, Direction and Reserved
- Outputs : 6 Open collector 24V relay driver
- Display: 20x4 Line alphanumeric
- Temperature: 55 Degree C Max operation temperature