Home :: Motion Controllers :: Mach/LinuxCNC Board :: Parallel Port Break-out Board (PP-BOB2-V3)

Parallel Port Break-out Board (PP-BOB2-V3)

Parallel Port Break-out Board (PP-BOB2-V3)
Weight 0.50 Kgs
Our price: 3900.00
Qty Out of stock


All independent inputs, opto-isolated and fully buffered parallel port breakout board designed for controlling CNC machines from PC based controller like Mach3, Turbo CNC, EMC2, KCAM etc.

Features are introduced here:

  • All the inputs are optoisolated, filtered and buffered for noise immunity.
  • All the outputs are buffered and taken out to screw terminals.
  • Selection of pull up or pull-down for motor outputs.
  • All outputs and inputs have LED indicators for easy diagnostics.
  • Motor output common terminal can be selected as 0v or 5v.
  • On board PWM to 0-10V circuit for spindle speed control from program.
  • DB25 as well as 26 pin FRC connectors.
  • FRC to DB25 cable is available as an option, allowing clean layout in control box and get DB25 connector out from control box.
  • On board Charge pump circuit is provided for safety.
  • Three on board relay provided for spindle or auxiliary on off control.
  • On axis (Step and Dir) signals are buffered twice and taken out to terminals enabling hardware slaving of 2 motors on one axis need for gantry style machines.
  • Made in India.

Download User Manual

(Heavy file, please wait for a while it downloads)


(Right click and "Save As" in Mach folder)

: *
: *
: *
Type the characters you see in the picture:

The code is case-sensitive and must be entered exactly as above.
S-500-24 24V/20A SMPS
₹ 3800.00
Power cable, 7 meter
₹ 1600.00