OP-DRG-45x150xR200 Cable Drag Chain
Plastic cable drag chain, 45 mm high x 150 mm wide, 200 mm bending radius, 1000 mm length.
Overview
The OP-DRG-45x150xR200 is a plastic cable drag chain for routing motor, encoder and sensor cables alongside a moving axis without them dragging on the machine bed or tangling on themselves.
Its cross-section is 45 mm high by 150 mm wide, the largest chain in this range, suited to a large bundle of power and control cables together. The 200 mm bending radius sets how tight a loop the chain can fold into as the axis travels - the largest radius in the range, needed because thicker power cables in a large bundle cannot bend as tightly without stressing their conductors.
It is supplied in a 1000 mm length and can be cut to size, in black plastic marked with colour dots for identifying chain segments during assembly.
Open-link construction lets cables be laid in from the side rather than threaded end to end, which matters when a cable already has connectors on both ends.
For a smaller bundle, the OP-DRG-35x100xR150 and the other chains in this range cover down to 25 mm high.
Supplied by Tiny Controls in India.
Specifications
| Width | 150 mm |
|---|---|
| Height | 45 mm |
| Bending radius | 200 mm |
| Length | 1000 mm |
| Material | Plastic |
| Colour | Black with color dots |