Spindle Motor Holder 65mm Dia
Spindle motor holder for 65 mm diameter spindles, for mounting the spindle to the Z axis.
Overview
A clamp for mounting a 65 mm diameter spindle motor to a machine's Z axis.
The number that matters is the body diameter, not the power. Spindles of quite different power ratings share a body diameter, and spindles of the same power come in different diameters, so measure the spindle you actually have, or check its stated body diameter, before choosing a clamp. A holder that does not match will not grip, and packing it out is not a fix on a part that carries all the cutting load. This catalogue's TS-19 and TS-20 800 W spindles are both 65 mm diameter and fit this clamp.
The clamp is the mechanical link between the cutting forces and the machine. Its rigidity sets how much the spindle deflects under load, which shows up directly as finish quality and cut accuracy.
For other spindle diameters, see the rest of the Spindle Holder range.
Supplied by Tiny Controls in India.
Specifications
| Spindle diameter | 65 mm |
|---|---|
| Function | Spindle to Z-axis mounting |
Questions
I might end up with either the water-cooled or air-cooled 800W spindle — does that change which clamp I need?
No — both the TS-19 (water-cooled) and TS-20 (air-cooled) are 65mm diameter and fit this same clamp. Cooling method doesn't change the body diameter.
What actually decides which clamp size I need — power or diameter?
Diameter, not power. Spindles of quite different power ratings can share a body diameter, and spindles of the same power can come in different diameters — measure the spindle you actually have.
My spindle is a different diameter — what do I look at instead?
The rest of the Spindle Holder range.