TS-34 3.2KW Spindle Motor ER20 (380V)
3.2 kW AC spindle, 10,000-24,000 rpm, ER20 collet, 100 mm dia x 260 mm, 6.8 kg, 380 V three-phase.
Overview
The TS-34 is a 3.2 kW spindle for heavier routing and milling, identical in power, speed and body size to the TS-30 but wound for a 380 V three-phase supply.
It runs at 10,000-24,000 rpm and takes tooling through an ER20 collet. The body is 100 mm in diameter and 260 mm long, weighing 6.8 kg.
Power is 3.2 kW, drawn from a 380 V three-phase supply at 8.5 A through a variable frequency drive sized for the motor; the VFD's output frequency sets the running speed within the rated range. The higher supply voltage means lower current than the 220 V TS-30 for the same power, which eases the load on supply wiring in workshops already running 380 V three-phase.
Where only a 220 V three-phase supply is available, the TS-30 delivers the same 3.2 kW and speed range wound for that voltage instead.
Supplied by Tiny Controls in India.
Specifications
| Power | 3.2 kW |
|---|---|
| Speed | 10000 - 24000 rpm |
| Collet | ER20 Chuck |
| Body diameter | 100 mm |
| Body length | 260 mm |
| Weight | 6.8 kg |
| Supply voltage | 380 V AC |
| Phase | Three |
| Current draw | 8.5 A |
Questions
My workshop already runs 380 V three-phase — does that actually help here compared to a 220 V spindle at the same power?
Yes — this draws 8.5 A versus the 220 V TS-30's 14 A for the same 3.2 kW, which eases the load on your supply wiring since you're already on 380 V.
I've only got 220 V three-phase available — is there an equivalent to this?
Yes — the TS-30 delivers the same 3.2 kW and speed range wound for a 220 V supply instead.
How does the body size compare to the TS-30?
Identical — 100mm diameter, 260mm long, 6.8 kg, same as the TS-30.
What collet does it take?
ER20.